# The image editor

> Opening an image in its editor, changing it with words or Regions, layers, masks and the Brush, retouching, Relight, cropping and extending, Upscale, Animate, versions, downloading and sharing.

Double-click an image on a Canvas, or right-click it and choose **Edit** (or choose **Edit** in its properties at the top right), to open it in the image editor. The image grows from where it was on your Canvas into the middle of the screen, the Canvas's tools give way to the editor's, and the address becomes the image's own (`/images/…`). Your Canvas stays just behind it, and the header's breadcrumb shows the image after the Canvas and its Page: choose either to close the editor and go back to the Canvas. Opened from a Space's library, the breadcrumb shows **Assets** before the image, which takes you back there (see [Finding your way](/work/finding-your-way/#the-breadcrumb)).

You can also go straight to one of its tools. Select an image and its properties panel at the top right lists what you can make from it, under **Use as reference** and **Edit**:

- **Region Edit**, **Relight** and **Animate** open the editor with that tool already chosen (see [Changing chosen things](#changing-chosen-things), [Relight](#relight) and [Animate](#animate)).
- **Variations** puts the Composer in **Ask**, with the image selected and "Suggest three variations of this image, each a different direction." ready to send. The Assistant replies with prompts to **Use** or **Make**: nothing is made, or charged, until you choose one.

The Assistant stays too, docked beside the editor with the image's own conversation (see [An image's own conversation](/create/assistant/#an-images-own-conversation)), and while the editor is open it is about the image in front of you. In **Image** mode the prompt reads "Describe what you want to change…"; in **Video** it animates the image instead, beside it on the Canvas, with any references you've chosen; in **Ask** you can talk the change through first. Say what to change ("make it night, with the lights on") and press Enter: the image shows **Making change…** straight away, while it is made. It is made from exactly what the image shows at that moment, with its layers as you see them. When it's ready, the change is a new layer on top, named after what you asked ("Edit – make it night"; see [Layers](#layers-and-removing-a-background)): the editor shows it, and so does the Canvas, where the image was. Nothing to accept, and nothing is lost: everything underneath stays as it was, so hiding the edit's layer shows the image as it was before. The next change is made from what the image shows then: hide or move layers first, and that is what it starts from. One change at a time. If you leave the editor while a change is being made, it carries on, and the image shows it when it's ready. When you close the editor, the image on the Canvas shows what the editor showed straight away, while it is saved as the image's picture. Open the image again and its layers are as you left them. The image itself is never shown above the prompt; images you chose with **Use as reference** (or add with +) are, to guide the change, and they go with it. They are numbered on their own, in the order you added them: the first is always Image 1, never the image you're changing, so "use Image 1's colours" means the first image above the prompt. Remove one and the rest renumber. The model is sent the image you're changing first, then the references, and is told which is which. Auto chooses the model for each change (see [How a change is made](#how-a-change-is-made)), and each one is charged as it is made, even if you hide its layer later.

**A group as one reference.** Select a group on the Canvas (for example, two images stacked as layers) and choose **Use as reference**. It's flattened as it looks on the Canvas, with its stacking, flips, masks and crops, into one picture named after the group, and that picture becomes one reference. It shows as uploading until it's stored, and it counts as one image towards the model's limit. It's a snapshot: changing the group afterwards doesn't change it. While anything in the group is still arriving, or failed, it isn't used, and Otherspace says why. You can also ask the Assistant on the Canvas, for example "use this group as a reference": it flattens the group the same way, in your browser, and adds it to the prompt's references.

A change keeps the image's exact shape, whichever model makes it, and its resolution. A model that can only come near an image's shape (FLUX.1 Schnell) isn't offered in the editor. If a model's result is a pixel or two off the image's shape, it is fitted to cover the image, centred, and is never stretched. An image about 1K wide (up to 1,280 pixels on its longer side) is changed at 1K, one up to about 2K (2,560 pixels) at 2K, and a larger one at 4K. A 2K image stays 2K however many times you change it. The cost beside the send button is for that size, and for the model Auto chose (or you did), before you send.

## How a change is made

**Edit behaviour** says how much freedom a change has. Set it in Region Edit's settings, or in the prompt's **Settings** for a change of the whole image:

- **Precise** keeps the image as it is and changes only what you asked, as little as it can: the composition, the subject's identity, shapes and positions stay.
- **Natural** (where it starts) balances the change with the image, so it fits in believably.
- **Creative** follows your words furthest, even where that changes the arrangement or composition ("lay the flowers flat across the table").

It stays as you set it until you change it. Your words go to the model as you wrote them, with one sentence for the behaviour added after.

**Auto** chooses the model for each change from what it is (a change of the whole image, or of Regions), its Edit behaviour and your **Quality**: **Fast** for price and speed, **Balanced** (where it starts), or **Best** for the finest result whatever it costs. On Balanced, Precise goes to FLUX.3 Image, which keeps what's around the change, and Natural and Creative go to Nano Banana 2.1, which follows bigger changes; Fast leans to FLUX.3 Klein, and Best to the finest of each. Auto only chooses a model your usage can pay for now. The panel shows **Auto ·** and the model, with its cost meter; its (i) says why it was chosen. Once a change is made, a note says **Made with** that model, with why behind its (i).

**Advanced** (in Region Edit's settings; in Settings for the whole image) holds Quality and the **Model**: Auto first, or choose one. A model you choose is kept, never swapped, and its own settings show, such as GPT Image 2.6's Quality.

## Zooming and moving around

To zoom, hold **Ctrl** (**Cmd** on a Mac) and scroll over the image, or pinch on a trackpad. It zooms about the pointer, so what you point at stays under it. Scrolling on its own moves the view. You can also drag with **Space** held, or with the middle mouse button. **Ctrl+=** and **Ctrl+-** zoom in and out, **Ctrl+0** fits the image to the window, and **Ctrl+1** shows it at its own size. The zoom control in the bottom-right corner (as on the Canvas) does the same: **−** and **+** step, type a level into it (100% is the image's own pixels) and press Enter, or open its menu for zoom to fit, 50%, 100% and 200%. Every tool works zoomed: paint fine detail close up, or zoom out to drag a crop well past the image's edges. Cropping, extending or upscaling fits the image again.

On a touch screen, two fingers move the view: drag them to pan, and pinch to zoom around the point between them. One finger works the tool in hand: it paints with the Brush, and drags the crop frame, a layer's handles or a target's edges, which a fingertip can take from a little further away. A pinch that starts on the image with the Brush in hand paints nothing. An Apple Pencil works like a mouse.

On a tablet or a phone (a screen narrower than 1024 pixels) the editor is compact: the image fills the screen, with **quick edit** at its foot, and **Tools** and **Layers** above it open the full tools and the Layers panel (in a sheet from the bottom) when you want them. With Tools open, a tool's settings fold to their name at the top; tap the name to open them, and again to close them. Press **Tools** again to go back to quick edit. Opened on a tool (**Region Edit**, **Relight** or **Animate** from an image's properties), it opens with the full tools. With no tool in hand, one finger moves the image and two pinch it; the page itself never zooms.

**Quick edit** changes the **Whole picture**, or **A Region**: drag over what to change, and **Clear the Region** to start again. Describe the change and press the send button, priced beside it for all four: it makes four variations, each the same edit the Composer makes, from the image as it was, and each its own layer. They appear below the image as they're made, after **Original**. Tap one to see it, and drag across the image to compare it with the original (**Before** on the left, **After** on the right). **Accept** keeps the one you chose and takes the others out (undo brings them back). Until you accept, the others stay as hidden layers in the Layers panel. While quick edit shows, its prompt is the one to use: the Assistant's Composer steps aside, and comes back when you open **Tools**.

Every setting with a slider also shows its number, which you can type over: press **Enter** (or click away) to use it, **Escape** to leave it as it was, or the **up** and **down arrow** keys to step it (with **Shift**, ten steps at a time). Where a setting has a default, double-click its name to go back to it.

## Changing chosen things

To change particular things in the image, choose **Region Edit** in the editor's toolbar and drag a rectangle around each thing: a jewel, a lamp, a pair of glasses. As you let go, a small card asks what to do there ("remove the glasses", "add a gold ring"): type it and press Enter. Each Region is numbered, with its words beside it, and they show in the prompt too. **Add region** puts one in the middle of the image; **Hide** hides them all, to see the image as it is. Select a Region to move it, drag its handles to resize it, or remove it from its card, or with **Delete**. You can draw up to eight; Region Edit's settings say so as you near it.

With every Region saying what to do, press Enter in the prompt with no words of your own; or add words for the whole image as well. One request changes every Region, and is charged once.

Regions point at what to change; they guide the model rather than fence it in, so a change can reach a little past its rectangle, as a new thing naturally would. How the rest of the image is kept depends on the model:

- **FLUX.3 Klein and FLUX.3 Image** take Regions natively and keep the image outside them themselves: the result is a new layer on top, named after what you asked.
- **Other models** are told where the Regions are, and their whole picture comes back with a mask that shows only what changed, so everywhere else the image beneath shows through exactly. If the mask misses part of the new thing, or leaves an edge, paint it with the **Brush** (see below).

Either way, hide the layer and the image is as it was. The Regions are cleared once the change is made.

**Esc** closes a Region's card and lets go of the selected Region, but never deletes one, so a stray key can't lose what you wrote; **Delete** removes the selected Region. With no Regions left, Esc puts Region Edit down, and pressing it again leaves the editor.

## Layers and removing a background

An image in the editor is made of layers, shown in the **Layers** panel at the bottom right, top first; the image sits beside the panels, never under them. An image you haven't layered is one layer, the image itself. Changes show straight away, and you can keep changing layers while a change is being made: what it makes is added, and your choices stay as you made them.

- The buttons at the bottom left of the Layers panel, as in Photoshop: **+** adds a **New layer** (blank and transparent, named "Layer 1", "Layer 2"…) or a **Group**; **Add mask** (the square with a circle) adds a mask to the layer you've chosen (made from the selection, if there is one: hold **Alt**/**Option** to hide what's selected instead); and the half-black, half-white circle adds an [adjustment layer](#adjustment-layers). Each goes above the layer you've chosen.
- The eye shows or hides a layer. Press an eye and drag up or down over the others to show or hide them all the same way, as in Photoshop; **Ctrl+Z** undoes the whole sweep at once. Double-click a name to rename it.
- Drag a layer up or down to reorder it, onto a group to put it in, or out of a group to take it out. With several chosen, dragging any of them moves them all together, in their order. A group's arrow collapses or expands it; hiding, locking, blending or fading a group does the same to everything in it.
- **Shift-click** chooses every layer from the chosen one to the one clicked; **Ctrl-click** (**Cmd-click** on a Mac) adds a layer to those chosen, or takes it away. **Group selected** (or **Ctrl+G**) puts them in a new group where the topmost was.
- Choose a layer and its **blend mode** (Normal, Multiply, Screen, Overlay, Soft Light, Hard Light, Colour Dodge, Colour Burn, Darken, Lighten, Difference, Hue, Saturation, Colour, Luminosity) and **opacity** show above the list.
- **Alt-click** a layer to clip it to the layer beneath: it shows only where that layer does. Several layers can clip to one.
- Right-click a layer (on a touch screen, press and hold it), or use **⋯**, to rename or duplicate it, clip or release it, lock or unlock it, group or ungroup it, or delete it (and, without a mask, to add one). Right-click its mask, or press and hold it, for the mask's own menu: disable or enable it, invert it, replace it with the selection, copy or paste it, or delete it. On a touch screen, **⋯** has the same under **Mask**. A locked layer can't be painted, moved or deleted. An image always keeps at least one layer.

Click a layer to choose it for the tools; click it again to choose none. A layer from a masked Region edit (a model told the Regions in words) is marked **Change**: it holds only what changed, and means something only over what is beneath it.

- With a whole image layer chosen, **Region Edit** changes that layer alone, and the result goes directly above it.
- With no layer chosen, Region Edit and the prompt change the image as it shows.

To remove a background, choose the layer and choose **Remove background** in the editor's toolbar (with only one layer, it's chosen for you). It shares its button with **Relight** and **Upscale**: hold the button, or use its corner, for the others. Its settings name the layer it will act on; choose **Remove** to go ahead. If that layer already has a mask, you're asked before it's replaced; choose **Replace mask** to go ahead (you can undo it). A **Change** layer has no background of its own, so Remove background isn't available for it. The image shows **Removing background…**, then the layer shows only its subject: it now has a mask, shown beside its picture in the Layers panel. Nothing is cut out of the picture: paint the mask to bring back what it hides, or choose **Delete mask** to have the whole layer again. Where the image is transparent the editor shows a light checkerboard, and on the Canvas you see what's behind it.

## Moving, scaling and turning layers

**Select** is the tool in hand when the editor opens, and whenever you put another tool down (with **Esc**, by applying it, or by clicking its button again); press **V** to take it up from another tool. The chosen layer gets a box around what of it shows: for a Region's change, just the new thing, not the whole picture.

- Drag inside the box to move the layer; the arrow keys move it a pixel at a time (with **Shift**, ten).
- Drag a corner to scale it; its proportions stay the same. Hold **Shift** to scale it freely, wider and taller on their own.
- Drag the middle of a side to stretch it one way only. Hold **Shift** to keep its proportions instead.
- Hold **Alt** (**Option** on a Mac) while scaling to scale from the middle: the opposite corner or side moves the other way as far.
- To distort, skew or put it in perspective, hold **Ctrl** (**Cmd** on a Mac) as you drag a handle, as in Photoshop's Free Transform:
    - **Ctrl**-drag a corner to move that corner on its own (distort).
    - **Ctrl**-drag the middle of a side to move that whole side.
    - **Ctrl+Alt**-drag the middle of a side to slide it along itself (skew).
    - **Ctrl+Alt+Shift**-drag a corner for perspective: the corner at the other end of that side moves the opposite way, as far.

  Nothing is redrawn: the layer keeps its own pixels and is drawn through its new shape, so you can change it again, or flip it, without losing anything. A shape stays sharp. A drag that would fold the layer over itself stops where it last could be. In perspective, a layer is drawn with your browser's WebGL; where that isn't available the editor can't show or save that layer.

- With a group chosen, its corners and sides scale, distort, skew and put in perspective everything in it together, each layer exactly.
- Drag the round handle above the box to turn it; hold **Shift** to turn in 15° steps.
- Press anywhere on the image and the layer whose pixel is on top there is chosen, and dragging moves it in the same go, even with another layer chosen whose box covers it (a background, a blank layer). With a group chosen, pressing what is in it moves the group. Press **Enter**, or click where nothing shows, to choose no layer.
- With a group chosen, everything in it moves together.
- To flip the chosen layer, press **Shift+H** (left for right) or **Shift+V** (top for bottom), or right-click it in the Layers panel and choose **Flip horizontal** or **Flip vertical**. A picture or shape flips where it is; a group flips everything in it about its middle. Nothing is redrawn: flip it again to have it exactly as it was. An adjustment layer has nothing to flip.

A mask moves, scales, turns, flips and warps with its layer, a shape's and a group's included. Each change shows as you make it and is kept once you let go, one step to undo. A locked layer can't be moved. With Select in hand, a chosen adjustment, shape or mask shows its own settings at the top right.

### Transforming what's selected, or a mask on its own

With something selected on a picture layer, press **Ctrl+T** (**Cmd+T** on a Mac), or choose **Transform selection** from **Edit selection** in a selection tool's settings. What's selected lifts off the layer and floats in Select's box: drag, scale, turn, distort, skew and put it in perspective with the same handles and keys as a layer, nudge it with the arrow keys, and flip it with **Shift+H** or **Shift+V**. The selection's outline moves with it. While it floats:

- **Ctrl+Z** steps back your last move of it, and **Ctrl+Shift+Z** forward again.
- **Enter** (or **Apply**) puts it back into the layer where it now is: the layer's picture is redrawn once, its pixels resampled, and one **Ctrl+Z** undoes all of it, the moved selection included.
- **Esc** (or **Cancel**) gives it up: nothing is changed or saved. Applying without moving it changes nothing either.
- Choosing another tool applies it first. The Layers panel waits until it's applied or cancelled. Leaving the editor cancels it.

With a layer's mask chosen (click the mask beside its picture), **Ctrl+T** transforms the mask on its own, without its layer: what's selected of it, or the whole mask with nothing selected. Where the mask moved from, it hides. Applied, it becomes the mask's next version, redrawn once. Only a picture's pixels or a mask can be transformed this way: a shape, a group or an adjustment layer says so, and you can transform the whole layer instead (deselect first).

## Copy, cut and paste

As in Photoshop (**Cmd** for **Ctrl** on a Mac), each also in **Edit selection** in a selection tool's settings, which is how to reach them on a touch screen:

- **Ctrl+C** copies what's selected of the chosen layer, as it shows: through its mask, where it is, with a feathered edge kept soft. With nothing selected, it copies the whole layer. **Ctrl+Shift+C** (**Copy merged**) copies what's selected of the whole image as you see it, every visible layer together.
- **Ctrl+X** copies it and clears it from the layer's picture (its mask isn't changed). A shape can be copied but not cut.
- **Ctrl+V** pastes it as a new layer above the chosen one, in exactly the place it was copied from, and chooses it.
- **Ctrl+J** with something selected puts a copy of it on a new layer above, in place; **Ctrl+Shift+J** (**Layer via cut**) does the same and clears it from the layer.

Copying also puts the pixels on your computer's clipboard as a PNG, so you can paste them into another app or onto the Canvas. Paste uses the editor's own copy, so it keeps its place, unless you've copied a different image in another app since: then that image is pasted, in the middle (smaller only if it wouldn't fit). A group or an adjustment layer has no pixels of its own to copy: the editor says so. Each cut and each paste is one step for **Ctrl+Z**, and none makes a new Version. Some browsers keep **Ctrl+Shift+C** and **Ctrl+Shift+J** for their own tools; use the menu there (the desktop app has every key).

## Adjustment layers

An adjustment layer changes the colour and tone of everything beneath it, without changing any picture: hide it, fade it, mask it or delete it, and what is beneath is as it was. Choose the half-black, half-white circle at the foot of the Layers panel, then **Adjustments**, **Hue/Saturation** or **Curves**; it goes above the layer you've chosen, and its settings appear at the top right whenever it is chosen. With a tool in use, a tab above the settings switches between the tool's and the adjustment's. Every change shows as you make it.

- **Adjustments**: exposure, contrast, highlights, shadows, saturation, temperature and tint, each from −100 to +100. Double-click a setting's name to put it back to 0.
- **Hue/Saturation**: hue, saturation and lightness for the whole image (**Master**) or for one range of colours at a time (reds, yellows, greens, cyans, blues, magentas). A dot marks each range you've changed.
- **Curves**: a curve for brightness (**RGB**), or for red, green or blue alone. Click the curve to add a point and drag it; double-click a point, or drag it off the side, to remove it. **Reset** straightens the curve shown; **Reset all** straightens all four.

Alt-click an adjustment layer to clip it to the layer beneath: then it changes only that layer. In a group, an adjustment changes everything beneath it, as if the group weren't there (the group's blend mode is **Pass Through**); give the group another blend mode to keep its adjustments to what is in it.

## Masks and the Brush

A layer with a mask shows where its mask is white, is hidden where it is black, and shows partly where it is grey; what is beneath shows through at exactly the same edge. Region edits and Remove Background make masks, and **Add mask** gives any layer or group one: all white, so nothing changes until you paint it, or, with something selected, showing what's selected and hiding the rest.

To see the whole layer without losing its mask, **Shift-click** the mask (or right-click it and choose **Disable mask**). The mask is kept as it is, marked with a red cross, and the layer shows as if it had none, on the Canvas too. You can still paint it and see it on its own. **Shift-click** it again (or **Enable mask**) to turn it back on. Like any change, it can be undone.

To use a layer's mask on another layer, right-click its mask and choose **Copy mask**, then choose **Paste mask** from the other layer's menu (or its mask's, if it has one). The pasted mask is a copy of its own, placed where the original lies in the image, so painting either one never changes the other (**Duplicate** shares the mask with the duplicate until either is changed). Where the copied layer had no mask, the pasted one hides. If the layer already has a mask, you're asked before it's replaced.

You can also drag a mask in the Layers panel, as in Photoshop: drag it onto another layer to move it there, or hold **Alt** (**Option** on a Mac) while you drag to copy it instead (the pointer shows a copy), or **Shift+Alt** to copy it inverted. If that layer already has a mask, you're asked before it's replaced. Either way, one **Ctrl+Z** undoes it. Hold **Alt** over the line between two layers and it's highlighted: click to clip the upper layer to the one below, and click again to release it.

With something selected, choose **Mask from selection** from a layer's menu: the layer shows what's selected and hides the rest, softly where the selection is feathered (on a layer with a mask, right-click the mask and choose **Replace with selection**, which asks first). Click a layer's mask to see its settings: **Density** makes what the mask hides show partly (at 0% the mask hides nothing), without changing the mask itself; **Feather** softens its edges by the pixels you choose; **Invert** swaps what it shows and hides (also in the layer's menu); and **From selection** remakes it from the selection. Each can be undone.

Choose **Brush** in the editor's toolbar (or press **B**), and its settings appear at the top right: size, softness (at 100% the brush fades all the way from its centre), opacity and flow (below 100%, paint builds up as you go over it). **[** and **]** make the brush in hand smaller and larger: the Brush, the Eraser, Clone, Spot Healing, Blur, Sharpen and Smudge. Its edge stays smooth at any softness. Hold **Shift** as you paint to keep a stroke straight across or straight down, or **Shift-click** to paint a straight line from where your last stroke ended.

- Click a layer's mask (beside its picture in the Layers panel) and the Brush paints the mask in greys: white shows the layer, black hides it, grey shows it partly. The layer's picture is never changed. As in Photoshop, the colours at the foot of the toolbar turn white and black while a mask is chosen, and the Brush, Fill and Gradient paint with them: **Show**, **Half** and **Hide** set the foreground colour to white, grey or black, **Swap white and black** (or **X**) swaps them, and **D** makes them white and black again. Any colour you pick there becomes its grey. Choose the picture again and your colours come back as you left them. Double-click the mask to see it on its own, in black and white, and paint it there; double-click it again (or press **Esc**) to go back.
- Click a layer's picture and the Brush paints it in colour. What you paint on is kept: the painting becomes the layer's own picture, and the original stays as it was.
- The Brush paints with the editor's **foreground colour**: see [Colours and the Eyedropper](#colours-and-the-eyedropper).
- With something selected, the Brush only paints inside the selection, softly where its edge is feathered.

You can paint anywhere on the image, even past the edges of the chosen layer: a layer smaller than the image (one placed, moved, or from before the image was extended) grows to take what you paint, its own pixels staying exactly where they were. Each stroke shows as you paint it and is kept a moment after you stop. Press **Esc** to put the Brush down.

The Brush's settings start with **Choose a brush…**: **Hard round**, **Soft round**, **Pencil**, **Ink**, **Paint**, **Texture** and **Masking** each paint differently, and **Save** keeps your own settings as a brush (remembered in this browser). The stroke beneath shows how it paints. **Spacing** sets how far apart its dabs are, **Smoothing** steadies a wobbly hand (the stroke trails the pointer a little), **Taper** starts each stroke thin, and **Pen pressure** sets what a pen's pressure changes: size, opacity, both or nothing. A mouse paints at full pressure.

## Eraser

Choose **Eraser** (or press **E**) to make the chosen layer transparent where you paint. It has the Brush's settings, kept apart from the Brush's. On a mask, the Eraser hides the layer there, as painting black would; to bring it back, paint the mask white.

## Clone

Choose **Clone** in the editor's toolbar (or press **S**) to paint a layer with its own pixels: to repeat something, or cover a blemish with what is beside it. It shares its button with the healing tools.

1. **Ctrl-click** (**⌘-click** on a Mac) where to copy from, or choose **Pick source** (or press **S** again) and click there. While you're choosing, the pointer is a target, so you can see exactly where it will copy from.
2. Paint. Before you do, the brush shows what it will copy; a small circle shows where it is copying from as you go.

With **Aligned** on, the distance stays the same for every stroke until you pick again. With it off, each stroke starts copying from the source again. **Sample** sets what it copies: **This layer**, the **Layers below** it, or **All layers** as they show. To keep a copy apart, add a new layer, choose **Layers below**, and clone onto it. Size, softness, opacity and pen pressure are the Brush's. What you paint is kept like a Brush stroke, and the original stays as it was.

## Healing and Patch

The healing tools take out blemishes, dust and things you don't want, so what's left blends in with what's around it. They share a button in the toolbar with Clone (press **J**, and **Shift+J** to go from one to the other), and work on a layer's picture.

- **Spot Healing:** paint over what to remove. When you let go, it is healed from somewhere nearby that matches, found for you.
- **Patch:** draw around what to fix (or select it with any selection tool), then drag the selection to where to take its texture from. What's selected is healed from there, and the selection stays where it was.

Each stroke or patch is one step for **Ctrl+Z**, and is kept like a Brush stroke: the original picture stays as it was. Healing runs in your browser: nothing is generated and nothing is charged.

## Blur, Sharpen and Smudge

Press **R** (or choose **Blur** in the toolbar; hold its button for the others) and paint over a layer, or its mask:

- **Blur** softens what you paint over.
- **Sharpen** brings out its detail.
- **Smudge** drags what is under the brush along the stroke, like a finger through wet paint.

**Shift+R** moves between them. **Strength** sets how much each stroke changes; paint again for more. With a pen, **Pen pressure** can change the size, the strength or both. Each stroke is one step to undo, and what you paint is kept like a Brush stroke.

## Shapes

Press **U** (or choose **Rectangle** in the toolbar; hold its button for the others) and drag on the image to draw a shape: a **Rectangle**, **Ellipse**, **Triangle**, **Polygon**, **Star**, **Line** or **Custom shape**. Hold **Shift** to keep it even (a square, a circle, or a line in 45° steps) and **Alt** (**Option**) to draw it from its centre. **Shift+U** moves between the shapes.

Each shape is a layer of its own, kept as a shape rather than pixels, so it stays sharp at any size and can be changed any time. Choose it and change its settings: a polygon's **Sides**, a star's **Points** and **Inner radius**, the **Corner radius**, its **Fill** and **Stroke** (a colour, or **None**) and the stroke's width. Move, scale and turn it with **Select**. A new shape is filled with the foreground colour, until you choose its colours; the next one drawn is like the last.

**Custom shape** has a starter library (a heart, arrows, a speech bubble and more). **Import SVG…** takes the outlines from an SVG file as a shape of its own. Only its outlines are kept: nothing else in the file is.

## Fill

Choose **Fill** in the editor's toolbar (or press **G**) and click the image: the pixels of the chosen layer connected to where you clicked, and like it, are filled with the colour (on a mask, the grey). **Tolerance** sets how alike a pixel must be to be filled: at 0% only exactly the same colour, higher to take in more. **Opacity** sets how much it covers. **Fill whole layer** (or **Fill whole mask**) fills all of it. Fill uses the foreground colour. With something selected, only the selection is filled. Turn off **Only connected pixels** to fill every pixel like the one you click, wherever it is.

## Gradient

Choose **Gradient** (it shares **Fill**'s button: right-click it, or press **Shift+G** with Fill in hand), then drag across the image: the foreground colour turns into the background colour from where you start to where you let go, opacity included. Hold **Shift** to keep the line to 45° steps. Choose **Linear**, **Radial**, **Angular**, **Reflected** or **Diamond**, **Reverse** to swap the colours, and **Opacity**. On a mask it lays greys, for a smooth blend that hides nothing of the layer's own pixels. With something selected, only the selection is changed. What you fill is kept like a Brush stroke: the original picture stays as it was.

## Selections

Choose what to change before you change it, as in Photoshop. The selection tools are at the top of the toolbar. Where tools share a button, it shows the one you used last, and this browser remembers it next time.

- **Rectangular Marquee** and **Elliptical Marquee** (**M**; **Shift+M** switches between them): drag to select a rectangle or an ellipse. Hold **Shift** as you drag for a square or a circle, and **Alt** to draw from the centre.
- **Lasso** and **Polygonal Lasso** (**L**; **Shift+L** switches): draw around what you want, or click its corners one by one. A lasso never goes beyond the image: a point you place past its edge (with the Polygonal or Magnetic Lasso you can click beside the image) lands on the edge, so you can select right up to it. With the Polygonal Lasso, double-click (or click the first point) to close, **Backspace** takes back the last point, and **Esc** cancels. You can zoom and move around while you draw.
- **Magnetic Lasso** (also **L**): click where to start, then trace roughly along an edge: the line clings to the strongest edge within its **Edge width** of the pointer (measured on screen, so it reaches as far at any zoom), placing points on the edge as it goes, and waiting where there is none. Click to place a point yourself (it lands on the edge nearby, if there is one), **Backspace** to take back the last stretch, and double-click or click the start to close: the last stretch follows the edge back to the start.
- **Quick Selection** and **Magic Wand** (**W**; **Shift+W** switches): with Quick Selection, paint over what you want and the selection grows to its edges (over a flat colour, all the way to them); each stroke adds to the selection, and **Alt** takes away. The Magic Wand selects the colour you click and what's like it: **Tolerance** sets how alike, and **Only connected pixels** keeps to what touches where you clicked. Both read the **Current layer** on its own unless you choose **All layers**, which reads the image as you see it.
- **Pen** (**P**), which shares the Lasso's button: click for corners, or drag to pull out handles for a curve. Drag a point to move it, or the dot at the end of a handle to reshape its curve (the other handle turns with it, so the curve stays smooth; hold **Alt** to move one alone). Click the first point to join the path back to it (drag from it to curve the join); it stays as it is to keep shaping, and **Backspace** opens it again. Nothing is selected until you choose the button above the joined path (**Select**, or **Add**, **Subtract** or **Intersect** with those modes), press **Enter**, or double-click. **Backspace** takes back a point and **Esc** cancels.

None of these uses AI or costs anything: they work on the image as it's shown.

Press and hold a tool's button (or right-click it, or click its corner mark) to choose between the tools that share it, as in Photoshop. The button then shows the one you chose.

A selection shows as moving dotted lines ("marching ants"). Hold **Shift** as you start to add to it, **Alt** to take away from it, or both to keep only where they overlap; or choose **New**, **Add**, **Subtract** or **Intersect** in the tool's settings. Drag inside the selection to move it (the pixels stay where they are). Click without dragging to deselect.

**Ctrl+A** (**Cmd+A**) selects everything, **Ctrl+D** deselects (as does a click beside the image with a selection tool), and **Ctrl+Shift+I** selects everything else. Every selection tool has the same settings:

- **Selection mode**: **New**, **Add**, **Subtract** or **Intersect**, for each shape you draw. Holding Shift or Alt as you start does the same for one shape.
- **Feather** softens the edge of each new selection by that many pixels.
- **Style** (the Marquees): **Normal** as you drag, **Fixed ratio** to keep a width to height (16 by 9, say) however far you drag, or **Fixed size** to place a box of that many pixels where you click (Alt centres it there). The two buttons beside the Marquee's name switch between a rectangle and an ellipse.
- **Deselect** and **Invert**.
- **Select similar** adds every pixel, anywhere in the image, whose colour is like any of the selection's colours (where the selection is soft, the pixels at least half selected count). It uses the Magic Wand's settings: its **Tolerance** for how alike, and **Current layer** or **All layers** for what it reads. On a large image it can take a moment.
- **Modify selection** (beside "Selection active") expands, contracts, smooths or feathers the selection you have, by the amount you choose.
- **Save selection** keeps it for this session; the bookmark button beside it lists those kept, to load one again or delete it.

Every change to a selection can be undone like any other.

While something is selected, the Brush, Eraser, Fill, Gradient, Clone, Spot Healing, Blur, Sharpen and Smudge only change pixels inside it.

**Save** in a selection tool's settings keeps the selection to use again while the editor is open; **Load** brings it back.

With something selected and no Regions drawn, a change you ask for in **Image** is made to what's selected: the prompt is asked about the selection's area, and what comes back is kept only inside the selection, so nothing outside it changes, even close by. The new layer's mask is narrowed to the selection, so you can paint it like any mask afterwards.

## Colours and the Eyedropper

The editor has one **foreground** and one **background** colour, shown at the foot of the toolbar. The Brush and Fill paint with the foreground colour, and it stays the same when you change tool. Click either square to choose a colour: drag in the square for brightness and colourfulness, use the strips for hue and opacity, or type it as **HEX**, **RGB** or **HSL**. The colour before is shown beside the new one; click it to go back. Colours you've used are kept under **Recent**, and **+** saves the colour under **Saved**. Recent is yours everywhere: the last 12 colours you used, in the editor and on every Canvas and Space, on any device. Saved colours belong to the Space the image is in, so everyone there sees them and anyone who can edit the Space can add or remove them. To remove a saved colour, click its **×**, Alt-click (Option-click) it, or press **Delete** with it focused. **X** swaps the two colours, and **D** makes them black and white. Your colours are remembered in this browser.

Choose the **Eyedropper** (**I**) and click the image to pick its colour. Its settings choose what it samples (**Visible layers**, or the **Current layer** alone), how much (**1 pixel**, or a **3 × 3** or **5 × 5 average**), and which colour it sets (**Foreground** or **Background**). **Alt-click** (**Option-click** on a Mac) always sets the background colour. As you move, a loupe around the pointer magnifies the pixels there, with the one it reads outlined; its ring shows the colour under the pointer above the colour it would replace, and its code shows beneath.

## Relight

**Relight** in the editor's toolbar (with Remove background and Upscale) changes the lighting of the image as it shows, and nothing else, as a new layer above it. Start from a preset (**Soft daylight**, **Golden hour**, **Hard noon sun**, **Beauty key + fill**, **Dramatic rim**, **Product studio**) or set it up yourself:

- **Natural**: drag the sun across the sky. The middle of the dome is overhead and its edge the horizon, with the camera at the bottom. Then set its intensity, its softness (crisp shadows to overcast) and its colour temperature (warm candlelight to cool shade).
- **Studio**: the subject seen from above, with the camera below it. Drag lights to place them, **+ Light** to add one (up to five), and choose a light to set its role (key, fill, rim or accent), intensity, softness and colour.

Choose **Relight**; the button shows the model that makes it and its cost meter: **Nano Banana 2.1**, or **Nano Banana Pro** (slower and dearer, and the most faithful to everything but the light). The layer is named after the preset or the setup ("Relight – Golden hour"). Hide it to see the image's own light again.

## Cropping and extending

Choose **Crop** in the editor's toolbar (or press **C**). A frame appears over the image:

- Drag inside it to move it, or drag its edges and corners to size it. Its edges and middle snap to the image's edges and middle as they come near, with a line to show where; hold **Alt** (**Option** on a Mac) to drag freely.
- Or type its **Width** and **Height** in pixels; it stays centred where it is.
- Drag or size it past the image's edges to extend the image: the new room is transparent.
- Choose an **Aspect ratio** to keep: Original, 1:1, 4:5, 3:2, 4:3, 3:4, 16:9 or 9:16. It stays chosen until you choose another. With **Free**, the link button between Width and Height keeps the frame's proportions as they are, so changing one changes the other.
- **Guides** draws the frame's thirds, a grid, or nothing, to line up what you keep. It stays as you left it the next time you crop.

### Rotating and straightening

Crop can turn the image as well as frame it, as Photoshop's Straighten does:

- Drag from just outside a corner of the frame (the pointer becomes a turning arrow) to turn the frame over the image. Hold **Shift** to turn it in steps of 15°.
- Or type its turn in degrees in **Angle**, under **Straighten** in the Crop panel (clockwise is positive).
- Or choose **Straighten** and draw a line along something in the image that should be level, such as a horizon. A line drawn nearer upright, such as a wall's edge, makes that upright instead.

As the frame turns, it shrinks to the largest frame of its proportions that stays inside the image, so the crop has no empty corners. Move or size it afterwards as you like; turning it back to 0° gives the frame you had. Apply turns the image so what is in the frame is upright, and crops it. Every layer turns with it: pictures, shapes and masks keep their places on one another, and adjustments change nothing. Nothing is cut, so you can crop again at the opposite angle to bring all of it back, and **Ctrl+Z** undoes the whole crop as one step.

Choose **Apply** (or press **Enter**) and the image becomes the frame; **Cancel** puts Crop down as it was, and **Reset** brings the frame back to the whole image, unturned. Nothing is cut: what falls outside stays in the layers, and cropping out again brings it back.

Tick **Fill new areas** and Apply also fills the room past the image's edges by continuing the scene, with Bria Expand, which keeps the image itself exactly as it is. If you turned the frame and sized it past the image, the empty corners are filled too. It goes on a layer beneath everything, so it shows only where nothing else does; its cost meter shows beside it. Without it, nothing is made. Press **Esc** to put Crop down without applying it.

## Split layers

**Split layers** in the editor's toolbar (it shares its button with **Region Edit**: hold the button for it) takes an image apart into layers. It has two choices.

**Quick** (**$0**: it costs nothing) splits the chosen layer (with only one, it's chosen for you). The layer becomes a group named after it ("Original – split") holding:

- its **Subject**;
- its **Background**;
- the layer as it was, hidden.

Subject and Background are the same picture, each with its own mask, and they meet exactly. Show, hide, move, mask, adjust or delete each on its own. Nothing is copied or lost: delete the group's parts and show the original to have it as it was. Like Remove Background, it works on a whole picture, not on a Region's change.

**High quality** takes apart the whole image as it shows, with Seedream 5 Flash Layerize. A group ("Layers – split") arrives on top holding:

- the scene's **Background**, with what was in front of it filled in;
- each thing in it (up to 16) as a layer of its own, named "Layer 1", "Layer 2"… and placed exactly where it was.

Together they look like the image did, and everything beneath is left as it was. The button shows its cost meter, for the most it can make: you are charged only for the layers it makes, the Background among them, so an image taken into a Background and three layers costs four layers' price. If your Organisation's usage can't pay for it (free usage covers a job up to $0.60), the plan that would stands in its cost, and choosing it explains, with **Upgrade to** that plan and **Buy more usage**, rather than taking the image apart.

## Upscale

**Upscale** in the editor's toolbar makes the image as it shows again larger, with finer detail, as a layer on top. **Topaz Wonder 3.5** makes it **2×** or **4×** its size; **Recraft Crisp**, much cheaper, enlarges it by its own amount. Each button shows the new size and its cost meter. The image grows with it: every other layer is enlarged in its place, so nothing moves, and transparency is kept.

## Animate

**Animate** in the editor's toolbar makes a video from the image as it shows. Describe how it moves ("the waves roll in, the camera drifts slowly right"), choose a model, and choose **Animate**. Each model shows its cost meter, and the first, **MiniMax H3 Turbo**, is the recommended one (Auto). MiniMax H3 Max, Seedance 2.0 Fast and 2.0, Wan 3, and Kling 3 and 3 Pro are there too.

The video is new, a 5-second clip starting from the image: the image itself doesn't change. While it is made, **Animating…** shows on the image. On a Canvas the video appears beside the image. Once it is made it opens in the video editor (see [Making videos](/create/videos/)). It is charged as it is made, like every model.

## Keyboard shortcuts

As in Photoshop: **Ctrl+Alt+Shift+N** (**Cmd+Option+Shift+N**) adds a new layer above the chosen one (in the desktop app, **Ctrl+N** / **Cmd+N** too: browsers keep those for a new window). **Ctrl+Alt+G** clips the chosen layer to the one below, or releases it. **Alt+Backspace** fills the selection (or the whole layer) with the foreground colour, and **Ctrl+Backspace** with the background colour. The tools: **V** Select, **M** Marquee, **L** Lasso, **W** Quick Selection and Magic Wand, **P** Pen, **B** Brush, **E** Eraser, **G** Fill and Gradient, **S** Clone, **R** Blur, Sharpen and Smudge, **U** Shapes, **I** Eyedropper, **C** Crop, **J** Spot Healing and Patch; **X** swaps the colours and **D** resets them.

Layers (**Cmd** for **Ctrl** on a Mac):

- **Ctrl+J** copies the chosen layer to a new layer above it. With something selected, only what's selected is copied, and the layer itself is left as it was; **Ctrl+Shift+J** cuts it to the new layer instead.
- **Ctrl+C**, **Ctrl+X** and **Ctrl+V** copy, cut and paste what's selected (see [Copy, cut and paste](#copy-cut-and-paste)); **Ctrl+Shift+C** copies merged.
- **Ctrl+E** merges the chosen layer into the picture below it. **Ctrl+Shift+E** merges every visible layer into one; hidden layers stay as they are.
- **Ctrl+G** groups the chosen layers, and **Ctrl+Shift+G** ungroups a group.
- **Ctrl+]** and **Ctrl+[** move the chosen layer up or down; with **Shift**, to the top or the bottom. **Alt+]** and **Alt+[** (**Option** on a Mac) choose the layer above or below.
- The number keys set opacity: **1** is 10%, **5** 50%, **0** 100%, and two typed quickly set that exact amount (**4**, **5** is 45%). With a Brush, Eraser or retouch tool in hand they set its opacity; with Select, the chosen layer's.
- **Delete** (or **Backspace**) with something selected clears what's selected on the chosen layer (on a mask, it hides it). With nothing selected, it deletes the chosen layers (never the last one); **Ctrl+Z** brings them back.

With **Select** (**Cmd** for **Ctrl** and **Option** for **Alt** on a Mac): **Shift** scales a corner freely or keeps a side's proportions, and **Alt** scales from the middle. **Ctrl**-drag a corner distorts it, **Ctrl**-drag a side moves that side, **Ctrl+Alt**-drag a side skews, and **Ctrl+Alt+Shift**-drag a corner puts the layer in perspective. **Shift+H** and **Shift+V** flip the chosen layer.

The view: **Z** takes up the Zoom tool (click to zoom in where you click, **Alt**-click to zoom out), and **H** the Hand (drag to move the view). **Escape** or choosing another tool puts them down. **Ctrl+T** picks up Select, to move, resize and turn the chosen layer; with something selected, or a mask chosen, it transforms just that (**Enter** applies, **Esc** cancels).

None of these keys does anything while you're typing in a field.

## Undo and redo

**Ctrl+Z** (**Cmd+Z** on a Mac) undoes the last change in the editor: a layer shown, moved, grouped, blended or deleted, a Brush stroke, a fill, a selection, a crop, a new layer, a cut or a paste, a transformed selection applied, a split, a removed background, or a change's layer arriving. **Ctrl+Shift+Z** (or **Ctrl+Y**) redoes it. On a touch screen, tap with two fingers to undo and with three to redo. Tap with four fingers to hide the editor's panels and see the image on its own, and again to bring them back. With the Brush, hold a finger still on the image for a moment to pick a colour instead of painting: a loupe follows your finger, and the colour under it becomes the foreground colour when you lift it. A run of quick changes to the same thing (a slider dragged, a layer nudged) is one step. Upscaling can't be undone: hide its layer instead.

## Downloading

**Download** (beside the close button at the top right) saves the image as it shows, every layer drawn at full size, as a PNG named after the image ("Harbour at dusk.png"). Hidden layers are left out. To save the image's own file in its own format, or as it was first added, use **Download** or **Download original** on the Canvas or in the library.

## Sharing

**Share** (immediately right of Download) shares the image by link, with the same dialog as **Share…** in the library: **Restricted** or **Anyone with the link**, **Allow download**, **Copy link** and **Reset link**. It shows for anyone who can share the image; someone who doesn't manage its Space can copy its link but not change it. Someone opening the link sees the image in this same editor, view only (see [Sharing](/work/sharing/#sharing-an-image-a-video-or-a-folder)).

## Versions

The versions button at the top left of the Layers panel names what the image is now: a version ("Original", "Version 2"), or **Current**, your latest edits. It lists the image's saved versions, newest first, each with its number, and Current above them. An image starts with one version, **Original** (and, if it was changed before layers, one for each change it had). Only **Create version** makes a version: keeping the image exactly as it is now, every layer as it is. Changing layers and making changes never do; the image is then Current. Choose a version to restore it: the image is that version again, and your edits are set aside as Current, so choosing **Current** brings them back. If you change the image while it's an older version, those changes are your latest edits: Current from then on. Anything made since a version stays in the layers panel, hidden, and nothing is removed. What the image is now is ticked: only ever one.

What the layers show is what the image shows everywhere: on the Canvas, when you download it, and when you use it as a reference. A moment after you stop changing layers (and when you leave the editor), the Canvas catches up, showing exactly what the editor shows: blend modes, groups and masks included. Showing, hiding, moving, renaming and changing layers never makes a new version of the image, and nothing piles up: only the picture the layers show now is kept.

To go back, choose **Close** (×) at the top right or **Done** (✓) in the editor's toolbar, press **Esc** (outside the prompt, once you've put Region Edit down), or use your browser's Back. The image returns to its place, and the Canvas is exactly as you left it: the same view, with the image still selected.

**Paste** (Ctrl/⌘ + V) an image copied from another app or a browser while the editor is open, and it arrives as a new layer above the chosen one, at its own size in the middle of the image (smaller only if it wouldn't fit). Pixels copied in the editor itself paste back exactly where they came from (see [Copy, cut and paste](#copy-cut-and-paste)). It never paints over a layer, and Ctrl/⌘ + Z takes it back.

**Add mask** shows the new mask beside its layer at once, and chooses it, so the Brush paints the mask straight away.

The image's address is the same wherever you opened it from. Opened on its own (pasted into a new tab, say), it shows the same editor without the Canvas; leaving it then takes you to the Space the image belongs to. Only people who can open that Space can open the image this way.
